Reel RV Products - Accessories, R.V. Water Hose Reels, RV Electrial, Video, Phone Reels
  Home

  About Us

  Products

  FAQ

  Dealers
Dealer
Resources

  Distributors

  Manufacturers

  Contact Us

 


 Reel RV
 Products Inc.

 Wetaskiwin,
 Alberta, Canada

 Phone:
 780-352-0113
 Fax:
 780-352-4430



Reel RV Products - The Hose Handler
RV 2100

Click Here for printable PDF Brochure:
Page 1   Page 2

 

The installed unit has a clean flush mounted appearance to the exterior of the RV. At the same time it provides a sealed barrier for air, water, dust, insects or vermin from moving between the interior and the exterior of the RV, no matter if the spool is out or in the closed position.
The hose handler housing passes through the exterior wall of the RV to the interior space where it is connected to the RV water system. Its compact size allows it to be installed into an unseen interior RV location like a closet, behind a counter or into a closed seat bench.
Reel RV's products have been designed and manufactured with strong exterior grade plastics. They are specifically formulated to withstand tough RV related environments such as: - damaging UVU sunlight, - ambient temperature swings, - varying exterior weather conditions as well as harmful road grime and residues.

Great care has gone into making our products very user friendly. Draining and storing loose hoses can be very frustrating when used in conjunction with RV's, and our Hose Handler provides a convenient solution by allowing for variable hose lengths to be used without exposing the entire hose length to the elements.

It also eliminates loose hoses in dedicated RV storage compartments, which are untidy and use up valuable storage space.

Our patent pending design eliminates leakage problems due to stressed hose connections on conventional RV hose hookups. All water hose handlers are installed with a back flow valve. This enables the hose to stay permanently fixed into the RV even when pressurized supplied water is not available and the RV water tank and pressure system is being utilized.

When winterizing or storing for extended periods, we recommend disconnecting the hose connection from the backflow valve to enable the hose to be completely drained of all water.

This Hose Handler was designed to be manually wrapped and not spin because:
- Costs would be double per unit.
- Water swivels required to make reels spin are higher maintenance due to leakage and increased warranty issues for the RV manufacturer.
- Majority of RV Park hookups are within 10 feet of the RV which makes manual unwinding and winding quick.

Only three or four wraps of the hose are required while enabling longer reaches if necessary. This reduces cost and maintenance issues associated with a spinning reel.


 

Included Features:

  • Housing and Spool - water tight housing and spool made of tough UVU and chemically resistant plastics
  • Hose - 25 or 50 foot ½ inch reinforced medical grade vinyl boat and camper hose
  • Strap & Cap Assembly - Threaded dust cap with attaching strap
  • Backflow Valve - CSA and RV approved backflow valve with ½ inch FPT connection.
  • Dimensions:
    A. Faceplate Flange Diameter
    B. Installation Hole Diameter
    C. Depth (including faceplate)
    D. Depth (excluding faceplate)

    Mounting Screw Radius


    Weight (approximate)

    - 330 mm / 13 inches
    - 293 mm / 11.5 inches
    - 242 mm / 9.5 inches
    - 216 mm / 8.5 inches

    - 157 mm / 6.1875 inches (12 screws - 30 degree spacing)

    - 2125 (25 foot hose) 2.53 kgs / 5.58 lbs
    - 2150 (50 foot hose) 3.55 kgs / 7.85 lbs

     

    Required Mounting Hardware (not included):

  • 12 - #8 x ¾" pan head screws (length may vary depending on RV wall construction)
  • Mounting Flange Caulking
  • Plumbing Fittings and Connector from Included Backflow Valve

    11 ½ inch Installation Hole Cutting Kit:
    (Includes):

  • 1 cutting ring template
  • 1 router guide bushing and lock nut
  • 1 straight cut bit (½ inch shank, 2 ½ inch carbide cutters)
        (Required equipment not included with kit):
  • 2 inch plunge router with ½ inch chuck

  • Note: this template is designed to aid in multiple installations like a sealer service department. If care is taken, an accurate 11 1/2" mounting hole can be easily cut into an RV wall for single installation applications with common cutting tools

     

    NOTE: Reel RV Products Inc. reserves the right to change, add, subtract or improve on our product line at any time without notice, in order to improve our products and services in the RV marketplace.

    Back To Products List

     

     


    Home  |  About Us  |  Products  |  FAQ  |  Dealers  |  Manufacturers  |  Contact Us